Your Chevy S10‘s brake irradiate indicator is over there to permit you understand that there is an issue with the brake system. The is different than the anti-lock brake system, which gets its very own ABS warning light. The brake light indicates that there is a difficulty with the physics braking mechanism itself.

You are watching: S10 parking brake light stays on

If friend are reading this post trying to figure out whether you must drive her vehicle, check the emergency brake first. If it’s engaged, the brake light will stay lit. If the manage isn’t every one of the method down, it’ll cause the brake warning irradiate to continue to be on. Examine to make sure that over there isn’t the little bit left the it demands to turn the brake irradiate off.

Now if the emergency brake didn’t deal with the situation, it’s time come look into what is leading to your S10’s brake warning irradiate to continue to be on. The brake irradiate is maybe the most vital warning light of all. We carry out not introduce driving v this irradiate on in ~ all. Doing therefore may lead to injury when the brakes fail.


Chevy S10 Brake Warning irradiate Causes

The brake warning light shows that your S10 has actually detected that one of its significant brake materials has failed, commonly detected v a loss of pressure. You’ll feel a lose of pressure that manifests itself in the kind of a “mushy” brake pedal.

If the brake irradiate is just coming on as soon as you push the brakes, that’s a definite indication the the pressure in the brake device is also low. Either the brakes need bled, or over there is a leak.

Brake liquid Leak

Since you’ve already checked the emergency brake handle, currently it’s time to check the master cylinder and also see if the brake liquid is low or not. Now if it is low, but not empty, adding more may provide a temporary fix.

If the brake liquid looks prefer it is all the way out, you’ll require to include more, bleed the brakes, and also ideally fix the difficulty so that you aren’t repeating every one of this again. If the brake fluid is leaking out over the brake pads and shoes, it method poor brake performance.

Just remember, it had to leak the end somewhere, and also that adding fluid without solving the difficulty is just a short-lived solution. The leak can obtain worse end time and also lead to brake failure.


Pressure Differential Switch

Your brake system is divided into 2 circuits. These circuits reduced the brake system in two. That way, if the brake system gets a leak or fails, you still have actually brakes on half of your S10’s wheels.

The press differential switch actions the difference in pressure in between the 2 circuits and will report the there is a difference by transforming on your S10’s brake warning light. In most vehicles this switch is located in the master cylinder. You’ll see a harness plugin somewhere roughly there.

Check the Brake Lights

Some vehicles will currently activate the brake warning light on the dash if the really brake lights behind it walk bad. Check to view that both the them room lighting up. If not, shot replacing the bulb and see if the solves the problem.

How to rotate off your S10’s Brake Light

The only method to turn the brake light turn off is come restore suitable line press to both brake circuits once the pedal is pushed. If your S10 is having actually trouble stopping, or noticeably leaking fluid, don’t drive it. Just have it towed to a mechanic. If you mess up fixing your engine, the vehicle does not move. If you mess up resolving the brakes, that doesn’t stop. That’s infinitely more dangerous.

See more: When Electroplating Silver On Iron What Is Oxidized ? Displacement Plating


If her Chevy S10’s brake warning light is on, and you’ve confirm the emergency brake, you’ll must look because that a leak in the lines, calipers, wheel cylinders, understand cylinder, etc. Good luck diagnosing the issue. If over there is anything that you would choose to add, please leave a comment below.