Make certain your wipers wipe your windshield completely. You might need to replace your windshield wipers.

You are watching: How to remove rear wiper arm ford explorer

Family Handyman
execute your windshield wipers leaving unwiped spots because that no noticeable reason, also after you replaced the blades? possibilities are the hinge is binding indigenous corrosion. We"ll present you how to replace the wiper arm and also fix this problem.

In this article, we’ll display you exactly how to replace a skip wiper arm.

Wiper arm Replacement: just how to eliminate Windshield Wipers 3 Ways

how to change windshield wipers

Photo 1: Wiper eight fit ~ above a splined shaft

Splines ~ above the within of the wiper arm fit over splines on the shaft.
how to replace windshield wipers, wiper eight replacement

Photo 2: part wipers are held with a retaining nut

Lift the plastic cover and remove the retaining nut. Climate pull the eight off the splined shaft.
how to replace windshield wipers

Photo 3: other wipers have a locking clip

Lift the wiper arm a couple of inches turn off the glass and slide the locking clip out. Then reduced the arm and also pull it turn off the splined shaft.

All wiper arms have a hinge in ~ the basic that enables the arm to flex as it adheres to the curvature that the window. If the wiper skips over details spots, also with a brand-new blade, chances are the hinge is binding indigenous corrosion. It’s most common on rear home window wipers due to the fact that they’re used less often.

You deserve to oil the hinge, however that’s simply a momentary fix—the corrosion and binding commonly return. To deal with the problem permanently, replace the wiper eight (available in ~ an auto parts store).

All wiper eight fit onto a splined shaft (Photo 1). Some are hosted in location with a nut. To replace that type, just lift the safety cap, remove the nut and pull off the arm (Photo 2).

The other type is held in place with a locking clip. Unlock the as presented in the bottom photo and install the brand-new arm (Photo 3).

See more: Third Generation Colt Saa 3Rd Generation Serial Numbers To 2012

Required devices for this Project

Have the important tools because that this DIY job lined up prior to you start—you’ll conserve time and also frustration.Socket/ratchet set You’ll likewise need a flat-blade screwdriver.